Browse Categories
Benchtop Basics 101>Episode 4>

Benchtop BasicsNo. 4

The ECM Carena 910
K&N-style airbox mod


This modification requires the slight trimming of the rear Carena fender
If installing the 17.5mm carburetor conversion kit,
first install rubber inlet manifold, and attach 17.5mm carburetor.
 
If installing airbox conversion onto 14mm carb, first install plastic
adapter flange onto aluminum carb intake flange.

Attach airbox at an angle

...to clear the expansion chamber

Grind a small relief in the rear fender to accommodate the airbox

Finished installation


This information is the intellectual property of Mid-South Minimoto and may not be reproduced, in whole or in part, unless authorized with the express written permission of Mid-South Minimoto.
Copyright 2000-2004 - all rights reserved.

This information is provided in good faith as a guide. We are not responsible for any typographical or informational errors or omissions.  Due to the many mechanical and technical variables, this information is to be used only as a guide, and is in no way guaranteed to be accurate or applicable to your engine, your bike, or your world in any way.


Search
 
 
                 Follow MidSouthMini on Twitter